IDRO-MATIC
_______________
This adjustable progressive pre-infusion cylinder offers a wide variation of starting pressures to play with.
This new system is retro-fitable to most existing machines.
TOUCHPAD
_______________
Each group can be activated with 4 easily programmed volumetric buttons, or a continuous flow button.
BASTONE
_______________
Each group is activated by one of our custom “Bastones”, a small lever which offers two programmable volumetric settings and, via a pushbutton, a continuous flow.
The Bastone can also be programmed for full manual control.
CRACKLE BLACK FRAME
_______________
The frame is finished with a crackle black powder coating.
A rigid and easy to clean finish.
RAW FRAME
_______________
The stainless steel frame is left in its original raw state and is lightly sand papered to create a slightly rough and raw look.
RAW BODY PANELS
_______________
The body panels are brushed in a single direction giving your machine a raw but stylish look.
POLISHED BODY PANELS
_______________
The 2 mm thick stainless steel body panels are polished for a shiny effect.
CRACKLE BLACK BODY PANELS
_______________
The stainless steel body panels are finished with a crackle black powder coating.
This durable finish creates a striking contrast between the bodywork and the polished parts.
BODY PANELS IN CUSTOM COLOUR(S)
_______________
The stainless steel body panels can be coated with a RAL colour of your choice, and in the finish of your choice, smooth or textured, and gloss, silk or matt.
ILLUMINATED REAR PANEL WITH SPIRIT LOGO
_______________
The Spirit design is printed on the illuminated rear panel.
The LED lighting can be switched on or off.
LUNGO OPTIMISATION
_______________
The Spirit is dedicated to deliver the best possible espresso extraction. If you prefer lungo over espresso we can alter your machine to optimise the pre-infusion for lungo’s.
This can be altered per group individually.
TEMPERATURE CONTROLLER IN FAHRENHEIT
_______________
The temperature in all our boilers is controlled by a PID; a self-learning device that keeps the temperature as stable as possible.
Your machine can be delivered with the readout in either degrees Celsius or Fahrenheit.
PUMP PER GROUP
_______________
For maximum capacity and pressure stability, every Spirit comes with 2 pumps. 1 for extraction and 1 to fill the steam boiler and deliver tea water at the right temperature. With the pump per group option each group is connected to a dedicated pump and thus, an individual water supply.
This offers the ability to set a different pressure per group. Furthermore, you can experiment with different water treatment systems.
ESPRESSO CUP ELEVATOR
_______________
Adapt your drip tray for espresso cups quickly and easily.
This option brings cup and machine closer together.
PITCHER TRAY
_______________
Extra room for your milk pitcher before, during and after steaming.
Easily adjustable in height and available for the left- and right-hand side of the drip tray.
IVORY COLOURED DETAILS
_______________
Group caps, filter holder handles & if so equipped Bastone lever knobs made of ivory coloured material. You can also choose a combination of red & ivory, to distinguish between group and steam lever.
WOODEN DETAILS
_______________
Personalise your machine with wooden American Walnut accessories. Tailor made by Specht Design from ethically sourced A grade wood.
WOODEN DETAILS
_______________
Personalise your machine with wooden American Oak accessories. Tailor made by Specht Design from ethically sourced A grade wood.
